Author |
Topic: moving X axis carriages for 2 extruders (Read 6113 times) |
|
Bay
Guest
|
 |
moving X axis carriages for 2 extruders
« on: Dec 21st, 2016, 11:03am » |
 Quote  Modify
 Remove
|
hi i need some help with firmware that supports RepRapDiscount Full Graphic Smart Controller to work
|
|
 IP Logged |
|
|
|
Denis Bakin
YaBB Administrator
Gender: 
Posts: 163
|
|
Re: moving X axis carriages for 2 extruders
« Reply #1 on: Dec 21st, 2016, 10:34pm » |
Quote Modify
|
There's a lot of info online. If you have a question specifically about Marlin X2 firmware this is the right place to ask.
|
|
IP Logged |
---------------------------
Denis Bakin
|
|
|
Bay
Guest
|
|
Re: moving X axis carriages for 2 extruders
« Reply #2 on: Dec 22nd, 2016, 1:20am » |
Quote Modify
Remove
|
this is what i change:// The RepRapDiscount FULL GRAPHIC Smart Controller (quadratic white PCB)
// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
//
// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib
#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
//automatic expansion
#if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define DOGLCD
#define U8GLIB_ST7920
#define REPRAP_DISCOUNT_SMART_CONTROLLER
#endif
then i compiling then i got this:Arduino: 1.6.7 (Windows 10), Board: "Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)"
In file included from sketch\Marlin.h:22:0,
from sketch\ConfigurationStore.cpp:1:
sketch\ConfigurationStore.cpp: In function 'void Config_ResetDefault()':
sketch\Configuration.h:370:48: warning: narrowing conversion of '5.0e+0' from 'double' to 'long int' inside { } [-Wnarrowing]
#define DEFAULT_EJERK {5.0, 5.0} // E0... (mm/sec) per extruder, max initial speed for retract moves
^
sketch\ConfigurationStore.cpp:332:20: note: in expansion of macro 'DEFAULT_EJERK'
long tmp5[] = DEFAULT_EJERK;
^
sketch\Configuration.h:370:48: warning: narrowing conversion of '5.0e+0' from 'double' to 'long int' inside { } [-Wnarrowing]
#define DEFAULT_EJERK {5.0, 5.0} // E0... (mm/sec) per extruder, max initial speed for retract moves
^
sketch\ConfigurationStore.cpp:332:20: note: in expansion of macro 'DEFAULT_EJERK'
long tmp5[] = DEFAULT_EJERK;
^
sketch\Marlin_main.cpp:2629:34: warning: extra tokens at end of #ifdef directive [enabled by default]
#ifdef EXTRUDER_RUNOUT_PREVENT && (EXTRUDERS == 1)
^
In file included from sketch\ultralcd.cpp:28:0:
sketch\dogm_lcd_implementation.h:91:26: warning: extra tokens at end of #ifdef directive [enabled by default]
#ifdef LCD_SCREEN_ROT_180;
^
sketch\dogm_lcd_implementation.h:95:26: warning: extra tokens at end of #ifdef directive [enabled by default]
#ifdef LCD_SCREEN_ROT_270;
^
In file included from sketch\Marlin.h:16:0,
from sketch\temperature.h:24,
from sketch\ultralcd.cpp:1:
DOGMbitmaps.h:4: error: variable 'start_bmp' must be const in order to be put into read-only section by means of '__attribute__((progmem))'
unsigned char start_bmp[574] PROGMEM = { //AVR-GCC, WinAVR
^
DOGMbitmaps.h:74: error: variable 'status_screen0_bmp' must be const in order to be put into read-only section by means of '__attribute__((progmem))'
unsigned char status_screen0_bmp[] PROGMEM = { //AVR-GCC, WinAVR
^
DOGMbitmaps.h:99: error: variable 'status_screen1_bmp' must be const in order to be put into read-only section by means of '__attribute__((progmem))'
unsigned char status_screen1_bmp[] PROGMEM = { //AVR-GCC, WinAVR
^
exit status 1
variable 'start_bmp' must be const in order to be put into read-only section by means of '__attribute__((progmem))'
This report would have more information with
"Show verbose output during compilation"
enabled in File > Preferences.
|
|
IP Logged |
|
|
|
Bay
Guest
|
|
Re: moving X axis carriages for 2 extruders
« Reply #3 on: Dec 22nd, 2016, 1:28am » |
Quote Modify
Remove
|
i went back to an old setup with single xtruder no problem i print just fine the only thing when i try to run marling X2 i can't define this line
// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib
#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
//automatic expansion
#if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define DOGLCD
#define U8GLIB_ST7920
#define REPRAP_DISCOUNT_SMART_CONTROLLER
#endif
|
|
IP Logged |
|
|
|
Denis Bakin
YaBB Administrator
Gender:
Posts: 163
|
|
Re: moving X axis carriages for 2 extruders
« Reply #4 on: Dec 23rd, 2016, 12:30am » |
Quote Modify
|
You might want to try compiling it with an older Arduino. It should work with v1.0.6.
https://www.arduino.cc/en/Main/OldSoftwareReleases#previous
Alternatively, you can fix the compilation errors. It looks like the new compiler is better at catching the errors. There are certainly a few that need fixing (the warnings where #ifdef is used instead of #if and semicolon is left at the end of the define statements).
The "const" has to be added in front of the "unsigned char..." in DOGMbitmaps.h, but that might cause new errors where those arrays are used and the code might need to be changed there to expect "const unsigned char"...
|
| « Last Edit: Dec 23rd, 2016, 12:33am by Denis Bakin » |
IP Logged |
---------------------------
Denis Bakin
|
|
|
Bay
Guest
|
|
Re: moving X axis carriages for 2 extruders
« Reply #5 on: Dec 23rd, 2016, 8:20am » |
Quote Modify
Remove
|
here my change
//LCD and SD support
//#define ULTRA_LCD //general lcd support, also 16x2
//#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
#define SDSUPPORT // Enable SD Card Support in Hardware Console
//#define ULTIMAKERCONTROLLER //as available from the ultimaker online store.
//#define ULTIPANEL //the ultipanel as on thingiverse
// The RepRapDiscount Smart Controller (white PCB)
// http://reprap.org/wiki/RepRapDiscount_Smart_Controller
//#define REPRAP_DISCOUNT_SMART_CONTROLLER
// The GADGETS3D G3D LCD/SD Controller (blue PCB)
// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel
//#define G3D_PANEL
// The RepRapDiscount FULL GRAPHIC Smart Controller (quadratic white PCB)
// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
//
// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib
#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
//automatic expansion
#if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define DOGLCD
#define U8GLIB_ST7920
#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
and i can compiling but i have a blue screen, i try to connect Pronterface i can home every thing not the x1
|
|
IP Logged |
|
|
|
Denis Bakin
YaBB Administrator
Gender:
Posts: 163
|
|
Re: moving X axis carriages for 2 extruders
« Reply #6 on: Dec 23rd, 2016, 12:23pm » |
Quote Modify
|
Please post diff of the code if trying to show your changes. For example:
Code:
D:\MarlinX2>git diff master..lcd
diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index eef9c42..75b6968 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -405,7 +405,7 @@ const bool Z_ENDSTOPS_INVERTING = false; // set to true to i
nvert the logic of t
// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
//
// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.g
oogle.com/p/u8glib/wiki/u8glib
-//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
+#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
//automatic expansion
#if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
|
|
You are not supposed to have just the blue screen... assuming you are using Arduino 1.0.6, downloaded the latest code from the "master" branch of the http://github.com/dob71/MarlinX2 repository and the only change in the code was to enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER.
If all the above is true then most likely you are having a hardware issue. Proper wiring would be the first thing I'd check.
|
|
IP Logged |
---------------------------
Denis Bakin
|
|
|
|
Home
Help
Search
Members
Login
Register
Reply
Notify of replies
Send Topic
Print